Cabelcon F-6-TD 4.9 NI Self Install TrueDrop Konnektor
Sofort verfügbar, Lieferzeit: 1-3 Tage
Antennen-Anschlußkabel 1,5m schwarz
Inhalt: 2 meter (1,15 € / 1 meter)
Sofort verfügbar, Lieferzeit: 1-3 Tage
Mastfußschelle - Stahl verzinkt
Sofort verfügbar, Lieferzeit: 1-3 Tage
VU+ Wireless USB Adapter 600 Mbps inkl. Antenne
Sofort verfügbar, Lieferzeit: 1-3 Tage
F-Stecker 8mm
Sofort verfügbar, Lieferzeit: 1-3 Tage
F-Stecker 7,0mm
Sofort verfügbar, Lieferzeit: 1-3 Tage
F-Stecker 7,5mm
Sofort verfügbar, Lieferzeit: 1-3 Tage
F-Kupplungen
Adapter mit zweimal F-Buchse bzw.-kupplung. Passend für alle F-Stecker.
Sofort verfügbar, Lieferzeit: 1-3 Tage
Gummitüllen
Sofort verfügbar, Lieferzeit: 1-3 Tage
F-Schnelladapter
Die neuen digitalen Probleme, wie z. B. Funkstörungen durch DECT-Telefone, erfordern ein hochwertiges, digitaltaugliches Breitband-Koaxkabel mit einer sehr hohen Abschirmung. Hier reichen im Sat-Bereich die herkömmlichen Werte nicht mehr aus. Deshalb verfügt dieses neue Kabel über eine 100-dB-Abschirmung fast im gesamten Bereich von 5-2200 MHz. Das Kabel ist damit vor Funkstörungen sicher.
Sofort verfügbar, Lieferzeit: 1-3 Tage
Slim Line Flachkabel
Sofort verfügbar, Lieferzeit: 1-3 Tage
Slim Line Flachkabel Ultra Dünn
Inhalt: 15 meter (0,28 € / 1 meter)
Sofort verfügbar, Lieferzeit: 1-3 Tage
Selfsat SNIPE 20P Controller-Kabel 7m für Selfsat SNIPE Serie neu
Sofort verfügbar, Lieferzeit: 1-3 Tage
Selfsat Snipe 12V Zigarettenanzünder-Kabel
Passend für Snipe 1 und 2, Snipe Pro und Snipe Pro Max Informationen zur Produktsicherheit Hersteller/EU Verantwortliche Person Hersteller Atelmo GmbH Konrad-Zuse-Str. 3, Linden, 35440, DE info@atelmo.com Telefon 00496403775330 EU Verantwortliche Person Atelmo GmbH Konrad-Zuse-Str. 3, Linden, 35440, DE info@atelmo.com Telefon 00496403775330
Sofort verfügbar, Lieferzeit: 1-3 Tage
Selfsat SNIPE Montageplatte
Sofort verfügbar, Lieferzeit: 1-3 Tage
Selfsat SNIPE 220V/230V Netzteil für die SNIPE 1 und SNIPE 2 Serie
Sofort verfügbar, Lieferzeit: 1-3 Tage
Selfsat SNIPE PRO Serie Montageplatte
Sofort verfügbar, Lieferzeit: 1-3 Tage
Selfsat Snipe Dome OV Abdeckhaube
Selfsat Snipe Dome OV Abdeckhaube Wichtig: Die Haube ist ausschließlich nur für die DOME OV geeignet Passt nicht bei DOME MN und DOME AD Informationen zur Produktsicherheit Hersteller/EU Verantwortliche Person Hersteller Atelmo GmbH Konrad-Zuse-Str. 3, Linden, 35440, DE info@atelmo.com Telefon 00496403775330 EU Verantwortliche Person Atelmo GmbH Konrad-Zuse-Str. 3, Linden, 35440, DE info@atelmo.com Telefon 00496403775330
Sofort verfügbar, Lieferzeit: 1-3 Tage
Selfsat Snipe Drive MN Abdeckhaube
Selfsat Snipe Drive MN Abdeckhaube Wichtig:Die Haube ist ausschließlich nur für die Drive MN geeignetHaube passt nicht bei anderen Selfsat Snipe Antennen! Informationen zur Produktsicherheit Hersteller/EU Verantwortliche Person Hersteller Atelmo GmbH Konrad-Zuse-Str. 3, Linden, 35440, DE info@atelmo.com Telefon 00496403775330 EU Verantwortliche Person Atelmo GmbH Konrad-Zuse-Str. 3, Linden, 35440, DE info@atelmo.com Telefon 00496403775330
Sofort verfügbar, Lieferzeit: 1-3 Tage
Inverto 32L412 - Unicable LNB - Unicable II LNB für bis zu 32 Teilnehmer
Sofort verfügbar, Lieferzeit: 1-3 Tage
Inverto Monoblock Single LNB
Inverto Monoblock 23mm Twin LNB
2 LNBs in einem Gehäuse mit integriertem DiSEqC Schalter. Für den Empfang von Astra + Hotbird mit 2 Receivern. Alternativ ist auch der Empfang von anderen Satelliten mit einem Abstand von 6° möglich. Main Features Low Phase Noise, DVB-S2 (HDTV) compliant Low Noise Figure (0.2 dB) Low Power Consumption Very high Cross Polarization Isolation Very high Frequency Stability Technical specifications Low band input frequency range 10.7 GHz ~ 11.7 GHz Low band output frequency range 950 MHz ~ 1950 MHz Low band LO frequency 9.75 GHz High band input frequency range 11.7 GHz ~ 12.75 GHz High band output frequency range 1100 MHz ~ 2150 MHz High band LO frequency 10.6 GHz Noise figure 0.2 dB typ. (0.7 dB max.) LO temperature drift ±3.0 MHz Max. LO initial accuracy @ 25 °C ±1.0 MHz Max. LO phase noise @ 10 kHz -90 dBc / Hz max. Conversion gain 50 dB ~ 65 dB Gain ripple (over 26 MHz bandwidth) ±0.75 dB Gain variation (over full band) ±4 dB max. Image rejection 40 dB min. 1 dB compression point (@ output) 0.0 dBm min. Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = Hotbird 13° East, Sat B = ASTRA 19.2° East) * Default Satellite Reception Cross polarization isolation 22 dB min. Output VSWR 2.5 : 1 In band spurious level -60 dBm max. Current consumption 150 mA max. @ 11 V ~ 20 V Operating temperature -30 °C ~ +60 °C Output impedance 75 O Output connector type F-Type (female) Recommended Dish Size 75 ~ 85 cm (F/D = 0.6) Weight 435 g Logistical info Packaging dimensions (W x D x H) 12,6 x 12,6 x 10,3 cm Packaging weight 0,56 kg Quantity per Carton 20 pcs Carton dimensions (W x D x H) 65 cm x 28.2 cm *22.6 cm Carton weight 11,3 kg Quantity per pallet 320pcs Informationen zur Produktsicherheit Hersteller/EU Verantwortliche Person Hersteller FTA Communication Technologies S.à r.l. 17, route de Luxembourg, Gonderange, 6182, LU info@inverto.tv Telefon 003522643671 EU Verantwortliche Person FTA Communication Technologies S.à r.l. 17, route de Luxembourg, Gonderange, 6182, LU info@inverto.tv Telefon 003522643671
Inverto Monoblock Quad LNB
2 LNBs in einem Gehäuse mit integriertem DiSEqC Schalter. Für den Empfang von Astra + Hotbird (oder zwei andere Satelliten im Abstand von 6°) mit 4 Receivern. Main Features Low Phase Noise, DVBS2 (HDTV) compliant Low Noise Figure (0.2 dB) Low Power Consumption Very high Cross Polarization Isolation Very high Frequency Stability Technical specifications Low band input frequency range 10.7 GHz ~ 11.7 GHz Low band output frequency range 950 MHz ~ 1950 MHz Low band LO frequency 9.75 GHz High band input frequency range 11.7 GHz ~ 12.75 GHz High band output frequency range 1100 MHz ~ 2150 MHz High band LO frequency 10.6 GHz Noise figure 0.2 dB typ. (0.7 dB max.) LO temperature drift ±3.0 MHz Max. LO initial accuracy @ 25 °C ±1.0 MHz Max. LO phase noise @ 10 kHz -90 dBc / Hz max. Conversion gain 50 dB ~ 65 dB Gain ripple (over 26 MHz bandwidth) ±0.75 dB Gain variation (over full band) ±4 dB max. Image rejection 40 dB min. 1 dB compression point (@ output) 0.0 dBm min. Control, Satellite A/B/C/D Selection DiSEqC 1.0 (Sat A* = Hotbird 13° East, Sat B = ASTRA 19.2° East) * Default Satellite Reception Cross polarization isolation 22 dB min. Output VSWR 2.5 : 1 In band spurious level -60 dBm max. Current consumption 250 mA max. @ 11 V ~ 20 V Operating temperature -30 °C ~ +60 °C Output impedance 75 O Output connector type F-Type (female) Recommended Dish Size 75 ~ 85 cm (F/D = 0.6) Weight 485 g Logistical info Packaging dimensions (W x D x H) 13,8 cm x 12,5 cm x 10,6 cm Packaging weight 0,58 kg Quantity per Carton 30 pcs Carton dimensions (W x D x H) 71 cm x 28 cm x 33.5 cm Carton weight 18,4 kg Quantity per pallet 240 pcs Informationen zur Produktsicherheit Hersteller/EU Verantwortliche Person Hersteller FTA Communication Technologies S.à r.l. 17, route de Luxembourg, Gonderange, 6182, LU info@inverto.tv Telefon 003522643671 EU Verantwortliche Person FTA Communication Technologies S.à r.l. 17, route de Luxembourg, Gonderange, 6182, LU info@inverto.tv Telefon 003522643671
Inverto Premium Universal 40 mm Octo LNB
Sofort verfügbar, Lieferzeit: 1-3 Tage
Inverto BLACK MultiConnect Expansion Kit
Sofort verfügbar, Lieferzeit: 1-3 Tage
Inverto BLACK Ultra Single LNB 0,2 db
Sofort verfügbar, Lieferzeit: 1-3 Tage
Inverto BLACK Ultra Twin LNB 0,2 db
Sofort verfügbar, Lieferzeit: 1-3 Tage